Using the Folding Machine

    The automated folding machine is located in the 2nd floor printer room. 
    1. 1

      Make sure machine is turned on

      Press the on/off button on the bottom right of the machine if it is not turned on. When machine is turned on, there will be red lights in the windows.  
    2. 2

      Add paper to be folded to machine

      Adjust lever on left side so that the paper tray in in the down position. Load paper into the tray so that the front edge is up against the white vertical bars.

      Once paper is loaded, adjust lever again so that tray comes up to sit horizontally.
    3. 3

      Select Type of fold

      use the two white buttons to select the type of fold. As you push on the right, white button the red led light will move indicating which type of fold is selected.

      NOTE: The shaded green represents the top of the page as it sits in the folding machine. It shows where the top of the page will be after it is folded.
    4. 4

      Check

      The lever should be at 0.
    5. 5

      Press start

      The ​small rectangular button will do ​two samples if you need to check the fold (or you can just put in a single sheet of paper.

      The round button will fold all the ​papers in the feeder.
    If you still have a question, we’re here to help. Contact us