Audio Visual Team

    1. 1

      Arrival at the Church

      A/V member(s) should arrive at the church at least 30 minutes prior to the start of the service.

      Upon arrival, member(s) should:

      • Ensure all necessary equipment is present and functioning properly.
      • Check in with the team leader for any last-minute updates and instructions.
      • Make any necessary adjustments to the equipment and set up for the service.
    2. 2

      Preparing for the Service

      Before the start of the service, A/V member(s) should:

      • Ensure all microphones are fully charged and turned on.
      • Check that the sound system is functioning properly.
      • Assist the worship team with any setup or equipment needs.
      • Ensure the stage is clear of any obstacles or hazards.
    3. 3

      During the Service

      During the service, A/V member(s) should:

      • Monitor and adjust the sound levels as needed.
      • Be alert for any technical issues and address them promptly.
      • Assist the worship team with any equipment needs, such as adjusting microphone height or handing off instruments.
      • Remain available to assist with any other needs as requested by the team leader.
      • Remain attentive to the service and participate as appropriate.
    4. 4

      After the Service

      After the service, A/V member(s) should:

      • Assist with the disassembly and packing up of equipment.
      • Ensure all equipment is properly stored and secured.
      • Check in with the team leader to ensure any issues or concerns are addressed.
      • Assist with any other tasks as requested by the team leader.
      • Leave the church premises in clean and orderly condition.
    If you still have a question, we’re here to help. Contact us