Kitchen Dishwasher Operation
-
1Close drain inside cabinetRight rear corner has a lever that must be down to allow the dishwasher water to fill. This also must be flipped to allow the dishwasher to empty at the end of use.
-
2Turn on DishwasherToggle switch on left side of main cabinet to on.
Press pushbutton on right side of main cabinet to start heating.
Close the cabinet door and allow the dishwasher to fill up with water.
Wait for about 15 minutes to heat up the water. -
3Load DiswasherBrown plastic trays of several different styles are used for glasses, dishes and utensils. Push one in the cabinet and close the door. When the cycle is complete use the second tray to push the first tray out, clear it from the door and close the door to begin the second cycle.
-
4Dishes air dry quicklyYou can put dishes away after a short time but be careful as they are still hot.
-
5Turn off DiswasherFlip the left toggle and press the right pushbutton to turn off the unit.
Lift the drain lever
Empty the strainer basket
Leave the doors open to allow the dishwasher to air dry. -
6End
Did this answer your question?
If you still have a question, we’re here to help. Contact us